RACH Series Single-Acting,Aluminium Hollow Plunger Cylinders-Hydraulic Cylinder/Jack-SAIVS

RACH Series Single-Acting,Aluminium Hollow Plunger Cylinders

Capacity:20ton/30ton/60ton/100ton/150 ton

Stroke:50/100/150/200/250 mm

Center Hole Diameter:27-79 mm

Maximum Operating Pressure:700 bar/10000 Psi/70 Mpa

Weight:5.2-77.2 kg/11.46-170.12 lbs

Model Number:RACH202-RACH15010

Oil

We offer a wide range of hydraulic tools that can perfectly replace and correspond with all Enerpac products.We will save customer costs, increase productivity and profit margins, Welcome to Get Latest Price now!

Capacity:20ton/30ton/60ton/100ton/150 ton

Stroke:50/100/150/200/250 mm

Center Hole Diameter:27-79 mm

Maximum Operating Pressure:700 bar/10000 Psi/70 Mpa

Weight:5.2-77.2 kg/11.46-170.12 lbs

Model Number:RACH202-RACH15010

Oil Capacity:164-5646 cm³

Manufacturer:SAIVS

Country of Origin:China

Hollow plunger design allows for both pull and push forces: This means the cylinder can be used to extend (push) or retract (pull) a load because the plunger has a hollow center that allows rods or cables to pass through.

Composite bearings increase cylinder life and sideload resistance: The use of composite materials in the bearings makes them more durable and able to handle loads applied at an angle (side loads) without excessive wear.

Hard-Coat finish on all surfaces resists damage and extends cylinder life: A hard-coat finish on the cylinder surfaces makes them more resistant to scratches, corrosion, and other wear, leading to a longer lifespan.

RACH

Floating center tube increases seal and product life: A floating center tube allows for slight misalignment without damaging the seals, which reduces leakage and extends the overall life of the cylinder.

Handles standard on all models: All models come equipped with handles for easier positioning and control.

Steel base plate and saddle for protection against load-induced damage: The base plate and saddle are made of steel for added strength and protection against damage caused by the forces exerted on the cylinder.

Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity: The stop ring prevents the plunger from extending beyond its intended limit, protecting the cylinder from damage even at its maximum operating force.

High strength return spring for rapid cylinder retraction: A strong return spring ensures the plunger retracts quickly after the force is released.

An RACH-306 powered by a P-392 hand pump

Steel Base Plate Mounting Holes
Cylinder Model/Capacity ton	Bolt Circle U (mm)	Thread V (mm)	Thread Depth Z (mm)
RACH-20	80	M6	12
RACH-30	110	M6	12
RACH-60	160	M6	12
RACH-100	220	M10	12
RACH-150	245	M10	12

*Including Base Plate Height of 6 mm

*All RACH-cylinders are equipped with bolt-on hollow removable saddles of hardened steel.

RACH Series Single-Acting,Aluminium Hollow Plunger Cylinders

Model Number	Capacity/Ton	Stroke/mm	Cylinder Effective Area/cm2	Oil Capacity/cm3	Collapsed Height/mm(A)	Extended Height/mm(B)	Outside Dia/mm(D)	Cylinder Bore Dia/mm(E)	Plunger Dia/mm(F)	Base To Advance Port/mm(H)	Saddle Dia/mm(J)	Saddle Protri. From Plgr./mm(K)	Center Hole Dia/mm(Y)	Base Mounting Holes Bolt Circle/mm(U)	Base Mounting Holes Thread(V)	Base Mounting Holes Thread Depth/mm(Z)	Weight/Kg
RACH-202	20	50	32.7	164	188	238	100	75	55	29	55	10	27	70	M6	12	5.2
RACH-204	20	100	32,7	327	251	351	100	75	55	29	55	10	27	70	M6	12	6.1
RACH-206	20	150	32.7	491	315	465	100	75	55	29	55	10	27	70	M6	12	7.1
RACH-208	20	200	32.7	654	378	578	100	75	55	29	55	10	27	70	M6	12	8
RACH-2010	20	250	32.7	818	442	692	100	75	55	29	55	10	27	70	M6	12	9
RACH-302	30	50	51.1	256	208	258	130	95	70	29	70	10	34	110	M6	12	8
RACH-304	30	100	51.1	511	267	367	130	95	70	29	70	10	34	110	M6	12	9.5
RACH-306	30	150	51.1	766	333	483	130	95	70	29	70	10	34	110	M6	12	11.2
RACH-308	30	200	51.1	1022	395	595	130	95	70	29	70	10	34	110	M6	12	12.9
RACH-3010	30	250	51.1	1277	458	708	130	95	70	29	70	10	34	110	M6	12	14.5
RACH-602	60	50	84.7	423	251	301	180	130	100	61	100	12	54	160	M6	12	16.2
RACH-604	60	100	84.7	847	315	415	180	130	100	61	100	12	54	160	M6	12	19.5
RACH-606	60	150	84.7	1270	380	530	180	130	100	61	100	12	54	160	M6	12	25.6
RACH-608	60	200	84.7	1694	445	645	180	130	100	61	100	12	54	160	M6	12	26
RACH-6010	60	250	84.7	2117	510	760	180	130	100	61	100	12	54	160	M6	12	29.6
RACH-1002	100	50	164.6	823	258	308	250	185	145	61	145	14	79	220	M10	12	33.8
RACH-1004	100	100	164.6	1646	325	425	250	185	145	61	145	14	79	220	M10	12	39.8
RACH-1006	100	150	164.6	2487	391	541	250	185	145	61	145	14	79	220	M10	12	46.2
RACH-1008	100	200	164.6	3291	459	659	250	185	145	61	145	14	79	220	M10	12	52.2
RACH-10010	100	250	164.6	4114	527	777	250	185	145	61	145	14	79	220	M10	12	58.8
RACH-1502	150	50	225.8	1129	280	330	275	205	150	61	145	14	79	245	M10	12	48.9
RACH-1504	150	100	225.8	2258	360	460	275	205	150	61	145	14	79	245	M10	12	55.7
RACH-1506	150	150	225.8	3387	430	580	275	205	150	61	145	14	79	245	M10	12	63
RACH-1508	150	200	225.8	4517	500	700	275	205	150	61	145	14	79	245	M10	12	70.1
RACH-15010	150	250	225.8	5646	570	820	275	205	150	61	145	14	79	245	M10	12	77.2

Tip:

SAIVS Industrial provides top-quality RACH Series Single-Acting,Aluminium Hollow Plunger Cylinders for hydraulic systems in various industries. Our products are designed for performance, reliability, and durability. We offer a wide range of products to suit your needs, including upgrades, maintenance, and repairs.

PROVIDING EXCELLENT SOLUTIONS BY SAIVS™

Speak to one of our experts today to learn more about our RACH Series Single-Acting,Aluminium Hollow Plunger Cylinders products solutions.

Request a Quote

Tags： RACH Series Single-Acting Aluminium Hollow Plunger Cylinders Aluminum Hydraulic Cylinders