how can I tell if the hydraulic charge pump is broken?
How to tell if the hydraulic charge pump is broken?
If the bearing in the hydraulic charge pump is damaged, then our judgment method is to see whether the shaft vibrates. If the vibration occurs at high speed, it means that the bearing is damaged.
The liner is rusted
If the inner tank of our hydraulic charge pump is rusted and the hydraulic charge pump is broken, the only way to judge in this case is to clean the inner tank by yourself, which usually happens after a long time of use. less in the past.
If the oil quality is not good or the oil quality is not up to the standard, it is easy to break the judgment. If the oil quality is not up to the standard, its pressure value is not up to the requirement.
If the mandrel is broken, the general hydraulic charge pump will greatly reduce the efficiency. When it runs, its running speed will become relatively slow, which is obviously different from the previous speed.
If the rotor in the hydraulic charge pump is broken, it also affects the working efficiency of the hydraulic charge pump. If you are a front-line worker, it should be easy to judge the broken rotor of the hydraulic charge pump.
If the blade in the hydraulic charge pump is broken, this situation is easy to judge. If the blade is broken, not only the efficiency is reduced, but also it may not work, which is easy to judge.
1. The bearing is damaged.
2. The liner is rusted.
3. The oil quality is not good.
4. The mandrel is broken.
5. The rotor is broken.
6. The blade is broken.