How to Select Hydraulic Motors and 6 Essential Installation Tips
Hydraulic Motors are crucial actuators in Hydraulic Systems, responsible for driving mechanical components to rotate.
Choosing the right hydraulic motor and following best installation practices directly impacts system efficiency, reliability, and service life.
In this article, we share a comprehensive selection guide and six essential tips for installing and using Hydraulic Motors — helping you make smarter purchasing decisions and ensure optimal performance.
How to Select a Hydraulic Motor
When selecting a hydraulic motor, focus on the following four core technical parameters:
1. Flow Rate (L/min)
Flow rate measures the volume of hydraulic oil entering the motor per minute.
It is directly proportional to the output shaft speed — the higher the flow rate, the faster the rotation.
Displacement (ml/r) refers to the volume of hydraulic fluid moved per shaft revolution.
Selecting the correct flow rate and displacement is critical to matching your system’s performance requirements.
2. Pressure (MPa)
Pressure is the driving force that powers the motor’s rotation.
It's important to note that operating pressure depends on the load, not the motor itself. Always select a motor whose rated pressure meets or exceeds your system’s maximum working pressure to prevent failures or damages.
3. Speed (r/min)
Motor speed depends on the flow rate and displacement. Hydraulic motors are categorized as either high-speed (above 500 r/min) or low-speed (below 500 r/min).
When choosing a motor, consider the required speed based on your specific application.
Also, ensure that the motor can maintain stable operation above its minimum stable speed to avoid creeping.
4. Torque (Nm)
Torque is the rotational force generated by the motor’s shaft.
The torque requirement is determined by the load; a motor must supply sufficient torque to drive the load without overloading.
If the load demands more torque than the motor can deliver, operational failures may occur.
Select a motor based on accurate torque calculations to ensure reliable performance.
The core formula for hydraulic motor selection is:
Flow Rate × Pressure = Torque × 2π × Speed
Knowing any three of these parameters allows you to calculate the fourth, ensuring accurate motor sizing for your application.
6 Critical Installation and Usage Tips
Ensure Cleanliness
Thoroughly clean the hydraulic system before installation to prevent contamination damage.Properly Connect Hydraulic Lines
Ensure tight and leak-free connections at all oil ports to maintain system integrity.Control Initial Start-Up Pressure
Gradually increase system pressure during the first start-up to protect the motor.Perform Air Bleeding
Remove air from the motor and hydraulic lines before operation to avoid cavitation and erratic behavior.Design a Smooth Return Line
Ensure the return oil line is free from restrictions to prevent excessive backpressure.Schedule Regular Inspections
Monitor flow rate, pressure, temperature, and torque regularly to detect potential issues early and extend motor life.
At Ningbo Saivs Machinery Co.,ltd., we specialize in supplying high-quality hydraulic motors with customizable options to meet diverse application needs.
Our motors are competitively priced, rigorously tested, and backed by expert technical support.
Contact us today to get a quote or request a custom solution tailored to your project!
Notice:
Interested in our products or ready to place an order? We’re just a message away—let’s build something great together.
If you can’t find the exact product or model you're looking for on our website, feel free to reach out.
Simply click the Contact Us or Contact Now button, or send us an email with your inquiry. Our team typically responds within 24 hours.