Maximum geometric
displacement
46 8
10
57 = 57,4 cm3/r (3.5 in3/r)
74 = 73,7 cm3/r (4.5 in3/r)
98 = 98,3 cm3/r (6.0 in3/r)
131 = 131,1 cm3/r (8.0 in3/r)
7
11
Mouting flange, prime
mover end
Configuration
Main ports
F = SAE 4-bolt flange ports
M = SAE 4-bolt flange ports with
metric mounting bolt threads
Shaft-end type, at prime
mover end
(See torque limits on page 14 and
shaft dimensions on page 15.)
9
Pump design number
Pressure compensator and
adjustment range
Shaft rotation, viewed at
prime mover end
52
13 Additional control functions
14 Torque limiter factory setting
15 Control design number
31 = C, CM, C**V, or IC
controls
13 = C**T controls
14 = C**VT controls
Built from pump with SAE “A” rear pad to
which suitable flange adapter is bolted.
For best availability and flexibility, order
PVH SAE “A” thru-drive pump and SAE “B”
or “C” adapter kit separately. ( See page 23.)
10 (Subject to change. Installation
dimensions unaltered for design
numbers 10 to 19 inclusive.)
12
25 = Normal factory setting of 250
bar (3625 psi) for “C” models.
7 = Normal factory setting of 70 bar
(1015 psi) for “CM” models.
Pressure compensator factory
setting in tens of bar
16 Special features suffix
027 = Composite 2-bolt/4-bolt
mounting conforming to SAE
“C” (except PVH131)
031 = Thru-drive SAE “A” pad cover
041 = No case-to-inlet relief valve (for
use with supercharged circuits).
3,4 bar (50 psi) maximum
inlet pressure
057 = Shaft-up operation
(vertical mount)
.....
